Adapter Clamp
Thursday, November 19th, 2009Adapter Clamp
 |
 New 2008 Campagnolo Record QS 9 10 speed front derailleur Braze On fits Chorus  US $139.00
|
 NIB Shimano Front Derailleur Model FD M667 For Compact 2 Ring Cranks US $29.00
|
 Parlee Carbon Front Der Braze on adaptor 318 mm US $59.91
|
 Direct Moun Braze On Adapter Clamp 349 355mm NEW US $4.95
|
 Problem Solver 286 Front derailleur clamp adapter NEW black braze on Bike US $15.25
|
 CRT Designs Chain Catcher 6061 Aluminum Black Anodized US $17.25
|
 Problem Solver 286 Front derailleur clamp adapter NEW silver braze on US $15.25
|
 Ultegra Front derailleur braze on double FD6700 US $22.99
|
 2011 Shimano Ultegra FD 6700 Braze On Front Derailleur LESS THAN 50 MI OF USE US $1.00
|
 FSA Braze On FD Front Derailleur Adapter Clamp Band 349 mm Black Braze On 1 3 8 US $10.00
|
 Campagnolo Braze on front derailleur adapter clamp 32 mm Black US $22.00
|
 SRAM 30 Front Gear Derailleur 3x9 Dual Pull Ø 318 349mm fits 48 38 28t Mech US $22.28
|
 CAMPAGNOLO Front Derailleur Adapter Clamp SILVER 35mm US $20.95
|
 K Edge Chain Catcher Braze on Black US $37.99
|
 NEW CAMPAGNOLO Front Derailleur Adapter Clamp 318 32mm BLACK US $20.94
|
 SHIMANO FRONT DERAILLEUR ADAPTERBRAZE ON CLAMP 318 US $7.87
|
 Shimano Braze On Front Derailleur Adapter Clamp 349 US $17.59
|
 OMNI Racer Worlds Lightest Front Derailleur Adapter Clamp BLACK 349 35mm US $18.99
|
 Problem Solver 286 Slotted Front derailleur clamp adapter NEW black braze on US $15.25
|
 Problem Solver 286 Slotted Front derailleur clamp adapter NEW silver braze on US $15.25
|
 OMNI Racer Front Derailleur Adapter Clamp 318 32mm SL US $16.98
|
 2011 Shimano Dura Ace FD 7900 Front Derailleur 349 Clamp on US $89.99
|
 Sram Rival 10 Speed Front Derailleur 318 Clamp for double US $44.99
|
 Shimano FD 5700 105 Road Bike Front Derailleur 2x10 Speed Braze On Black Clamp US $45.95
|
 OMNI Racer Front Derailleur Adapter Clamp 349 35mm WH US $16.99
|
 K Edge Braze On Front Derailleur Mounting Clamp Adapter 318 Black US $42.99
|
 FRONT Derailleur Adapt Clamp Braze on Shimano Sram 286 f vintage steel frames US $15.49
|
 SRAM RED FRONT DERAILLEUR 318mm ADAPTER CLAMP US $34.95
|
 OMNI Racer Front Derailleur Adapter Clamp 286mm WH US $16.99
|
 OMNI Racer Front Derailleur Adapter Clamp 318 32mm WH US $14.98
|
 New Microshift MTB Front DerailleurFD M64 3 speed US $27.60
|
 2011 Shimano Ultegra 6700 Front Derailleur Braze on US $54.99
|
 Shimano DI2 Dura Ace Electronic Shifter Upgrade Kit drivetrain 10 speed NEW US $2,149.99
|
 Shimano Dura Ace front derailleur RD 7700 triple in VG cond 9 speed US $39.95
|
 SRAM Red Front Derailleur 349mm Adapter Clamp US $16.95
|
 SRAM Braze on Front Derailleur Adapter Clamp 349mm US $15.95
|
 SRAM 30 Front Gear Derailleur 3x9 Dual Pull Ø 318 349mm fits 42 32 22t Mech US $22.28
|
 SRAM Braze on Front Derailleur Adapter Clamp 318mm US $15.95
|
 K Edge Braze On Front Derailleur Mounting Clamp Adapter 349 Gold US $42.99
|
 SHIMANO FD 5700 105 FRONT DERAILLEUR SILVER BRAZE ON US $45.95
|
 Parlee Carbon Front Der Braze on adaptor 286mm US $99.93
|
 New Shimano Deore FD M591 Front Derailleur 66 69o US $44.99
|
 Sram 349 front derailleur clamp adaptor NEW braze on US $16.00
|
 SRAM 349mm Derailleur Braze on Clamp Adaptor 35 111784 US $16.00
|
 SHIMANO 318 front derailleur clamp on braze on adapter US $15.00
|
 SRAM Red 2x10sp front derailleur 349mm steel cage silver US $129.95
|
 SRAM Red 2x10sp front derailleur 318mm steel cage silver US $129.95
|
 OMNI Racer Carbon Derailleur Adapter Clamp 286mm US $19.95
|
 2009 SHIMANO Dura Ace FD 7900 B clamp band US $114.99
|
 OMNI Racer Carbon Derailleur Adapter Clamp 318 32mm US $19.95
|
Starting
Adam Hunter of Cookson Precious Metals discusses the importance of creating the right environment for a jewelers workshop, and the key jewelers tools needed to furnish the start-up bench.
Making jewellery does not require a large space or big pieces of equipment or even furniture. A selection of key workshop pieces combined with basic hand tools provides everything for the first workshop. Cooksons provides a full range of Jewelery tools, - everything from basic hand tools, pre packed tool kits, consumables, larger machinery right through to the professional jewelers bench.
Your first workshop:
Often the beginner or student will start making jewellery on 'normal' desk, worktop or even kitchen table! Adapting the table can be easily be achieved by clamping a G clamp bench vice or anvil. The jewelers peg /pin can then be held in place securely giving a simple, yet sturdy place to work.
The peg is perhaps the most vital part of any setup allowing the jeweler to work quickly and efficiently. This wedge or triangle of wood supports the piece, holding it in a notch or v shape insert. This holds the piece rigid, allowing the jeweler to saw, cut, & file.
If adapting an existing desk the desk should be elevated, so that the working area is at mid chest level when the jeweler is sat upright, thus allow maximum control of your tools and metals.
Let there be light, & ventilation:
Although normal desks can be adapted, two factors must be in place when setting up your 'bench' - light and ventilation. The work area needs to well ventilated to ensure a safe working environment combined with good bright and direct lighting. Natural light can be complemented by adjustable lamps ensuring that no shadow falls over your piece from the jeweler or the equipment.
The professional jewelers bench:
The traditional jewelers bench is a purposed designed and provides the perfect working area for any project. Often mistakenly seen as expensive luxury, a good bench will last you a lifetime and most importantly will help in improving your technique. Benches are higher than a normal desk (mid chest level if the jeweler is sitting uptight) ensuring that the jeweler does not stoop to work. Most benches have the semi circle cut out ensuring that you can sit close to the to the work, and with the aid of a bench skin collects scrap and protect the jeweler from hot or sharp objects.
Organizing jewellery tools:
Keeping a workshop tidy, and the tools organized will help the jeweler when working, creating a efficient working environment. Both tools & materials should ideally be kept close to the bench, with the aim of trying to keep all materials within arms reach. Practically many of the basic jewelers tools will be actually left on the bench - Pliers, files, cutters, tweezers are used so often that they can be left on the work top for immediate access.
As a large part of jewellery making involves heat often a section of the bench will be dedicated to the equipment needed for soldering. Often the soldering area will be based around the placement of a torch, with the soldering block placed alongside a borax cone and dish.
For other materials such as jewellery findings, settings, and metal, storage containers should be used. These ideally have sliding draws to allow you to split different carats, sizes or types of findings.
Once the workshop is established all that remains to be added is the essential basic selection of popular jewellery tools such as files, saw & saw blades, emery & polishing sticks, pliers, cutters, verniers along with forming tools and heating / soldering equipment.
About the Author
Adam Hunter - E-commerce Marketing Manager of cooksongold.com. Cookson Precious Metals offer a choice of supplies from over 10,000 products including
jewellery tools
, findings, precious metal clay, wire and precious metal sheet - gold, silver, platinum and palladium plus technical information for jewelers, jobbers, designer, craftsmen, artisans and students.